Led gobo logo projector light | Logo projector design

In the existing shopping malls and entertainment venues, in order to display content and provide different display effects from ordinary display boards and other devices, projection lamps with LOGO are often used, and LOGO projector light project light and shadow on the wall or bottom surface by means of light projection Patterns, graphics, text and other display content can be displayed in the patterns, and different content displays can be matched with different LOGO films. The projection LOGO not only has dynamic effects, it is easy to attract attention, create a warm and harmonious atmosphere in the room, but also can display the latest creativity, promotional information, and products.

In the existing LOGO projector lamps, due to structural reasons, there are problems of poor definition, fewer functions, and difficult operation. At the same time, some LOGO projector lamps are installed in outdoor places. Because of the external motor, it affects the overall aesthetics. At the same time, there may be waterproof problems, and the use effect needs to be improved.

For this reason, it is necessary to optimize the structure of the existing LOGO projection lamp to make it have good projection clarity and waterproof effect.

Technical realization elements:

In order to solve the above technical problems, the new LOGO projection lamp produced by LEDY takes the heat dissipation body as the overall frame, and integrates the remote control motor internally, and connects with the concentrating component, so that the whole lamp has a good waterproof effect; at the same time, through optimization, The setting method of the lens and the structure of the adjustment component make the projection of the LOGO clear and can adjust the size of the projection, which can meet the display needs of LOGO patterns, text and other content in different places.

In order to achieve the above objectives, we provide the following technical solutions:

A LOGO projection lamp includes a driving component, a heat dissipation body, an LED module, a light-concentrating component, and an adjustment component. The heat dissipation body is provided with an installation cavity, the driving component and the LED module are built in the installation cavity, and the LED module is located Between the driving component and the concentrating component; the concentrating component is driven to rotate by the driving component, which includes a fixing seat, a bearing member, a pattern plate, a LOGO pattern sheet, and a pattern press, and a first lens arranged on the fixing seat; The seating sleeve is installed in the installation cavity and connected with the pattern plate through the bearing member; the LOGO pattern sheet is replaceably arranged on the pattern plate and is pressed by the patterned pressing; the adjusting component is arranged at the front end of the concentrating component, and Adjust the size of the LOGO pattern projected by the condenser assembly.

In the projection lamp, the driving component is located in the installation cavity of the heat dissipation body to form a built-in structure, which makes the overall lamp concise and beautiful while obtaining a good waterproof effect. In the condensing assembly, the LOGO gobo is pressed on the gobo plate through the pattern press, and the LOGO gobo can be selected, adjusted, and replaced according to the needs of the scene, and the operation is simple. The adjustment component can adjust the size of the projected LOGO pattern according to the actual situation of the projection range to meet the display requirements.

The technical scheme of the new Logo projector lamp is based on the driving components including a control board, a remote control motor, a driving wheel, and a driven wheel, wherein the driving wheel is connected to the fixed seat through the driven wheel; the control board controls the remote control motor to drive the driving wheel to rotate.

The operator can remotely operate the drive components of the projection lamp as needed. After receiving the control signal, the control board controls the remote motor, including turning on and off the rotation and adjusting the speed, and then drives the driving wheel and the driven wheel to move. Finally, the LOGO pattern piece is rotated, so that the projected LOGO pattern produces a dynamic effect and creates a different display atmosphere.

The LED module includes an LED light source and a second lens -> the second lens covers the top of the LED light source -> the adjustment component includes a telescopic tube, a third lens, and a fourth lens -> the third lens and the fourth lens are arranged on the telescopic tube The front and rear end -> the second lens, the third lens, and the fourth lens, in cooperation with the first lens, optimize the light path of the LED light source and the projection path of the LOGO pattern sheet to make the projection clear and display clear. -> Bracket and mounting plate, -> The bracket has a U-shaped structure, which is arranged on the outside of the heat dissipation body, and is fixedly connected with the mounting plate -> The setting of the bracket and the mounting plate mainly enables the projection lamp to be different according to requirements The U-shaped bracket can make the main body of the projection lamp be adjusted in the vertical direction. ->The heat dissipation body is also provided with a back cover ->The back cover seals the installation cavity to form a closed space and obtain a good waterproof effect.

Based on the above technical scheme, the technical effects obtained by the present utility model are:

(1) In the LOGO projection lamp provided by the present utility model, the driving component is located in the installation cavity of the heat dissipation body to form a structure with a built-in motor, which makes the overall lamp simple and beautiful while obtaining a good waterproof effect.
(2) The LOGO projection lamp of the present utility model optimizes the lens setting mode and the structure of the adjustment component to make the projection of the LOGO clear and complete the size adjustment of the projection; and through the remote control drive, the projected LOGO pattern is dynamic The effect meets the display needs of different places for LOGO patterns, text, and other content.

Detailed description

In order to facilitate the understanding of the design of the gobo projection lamp, the following will describe the utility model more comprehensively in conjunction with the structure of the picture and specific embodiments. The figure shows the preferred embodiment of the pattern projection lamp. However, the present invention can be implemented in many different forms and is not limited to the implementation described herein.

In the driving assembly 1 and the concentrating assembly 4, the driving assembly 1 includes a control board 11, a remote control motor 12, a driving wheel 13, and a driven wheel 14. The control board 11 controls the remote control motor 12 to drive the driving wheel 13 to rotate; The optical assembly 4 includes a fixing base 41, a bearing member 42, a pattern plate 43, a LOGO pattern sheet 44, and a pattern presser 45, and a first lens 46 arranged on the fixing base 41, and the fixing base 41 is sleeved and installed in the mounting cavity 21 In; the light-concentrating assembly 4 is driven by the driving assembly 1 to rotate, and the specific connection relationship is that the fixed seat 41 is connected to the driving wheel 13 through the driven wheel 14. The operator can remotely operate the drive assembly 1 of the projection lamp as required. After receiving the control signal, the control board 11 controls the remote control motor 12, including turning on and off the rotation and adjusting the speed, and then drives the driving wheels 13 and The movement of the driven wheel 14 finally causes the LOGO pattern piece to rotate, so that the projected LOGO pattern produces a dynamic effect and creates a different display atmosphere.
In the projection lamp, the LOGO gobo 44 of the concentrating assembly is pressed on the gobo plate 43 by the gobo button 45, and the LOGO gobo can be selected, adjusted, and replaced according to the needs of the scene, and the operation is simple. Adjustment component 5 can adjust the size of the projected LOGO pattern according to the actual situation of the projection range to meet the display requirements.

On the light source, the LED module 3 is located between the driving assembly 1 and the concentrating assembly 4 and includes an LED light source 31 and a second lens 32, and the second lens 32 covers the LED light source 31.

The adjustment assembly 5 includes a telescopic barrel 51, a third lens 52, and a fourth lens 53, wherein the third lens 52 is provided at the front end of the telescopic barrel 51, and the fourth lens 53 is provided at the rear end of the telescopic barrel 51.

The first lens 46, the second lens 32, the third lens 52, and the fourth lens 53 cooperate with each other to optimize the light path of the LED light source and the projection path of the LOGO pattern sheet. The light emitted by the LED light source passes through the first lens 46 and the After the two lenses 32, the pattern plate 43, the LOGO pattern sheet 44, the third lens 52 and the fourth lens 53, project the LOGO pattern onto the ground or the wall, so that the projection is clear and the display is clear.

In the installation structure, bracket 6 has a U-shaped structure, which is arranged on the outside of the heat dissipation body 2 by a slotted screw, and is fixedly connected with the mounting plate 7, so that the projection lamp can be installed in different positions according to the requirements. The U-shaped structure The bracket allows the main body of the projection lamp to be adjusted in the vertical direction. The back cover 22 of the heat-dissipating main body 2 closes the installation cavity 21 to form a closed space and obtain a good waterproof effect.

In summary, the LOGO projection lamp uses the heat dissipation body as the overall frame, and the remote control motor is integrated internally and connected with the condenser assembly to make the lamp have a good waterproof effect. At the same time, by optimizing the lens setting and adjustment The structure of the components makes the projection of the LOGO clear and can adjust the size of the projection to meet the display needs of LOGO patterns, text, and other content in different places.

Home > News

Led gobo logo projector light | Logo projector design

Technical realization elements:

In order to achieve the above objectives, we provide the following technical solutions:

Based on the above technical scheme, the technical effects obtained by the present utility model are:

Detailed description

SEND YOUR INQUIRY!